Category:Meccano Motor Car Constructor No2 Outfits

From The Brighton Toy and Model Index
Revision as of 16:13, 15 August 2023 by BTMM Eric (talk | contribs)
Jump to navigationJump to search



Toy Brands and Manufacturers

Motor Car Constructor Outfit No2 (MCat 1934).jpg

Meccano Motor Car Constructor No2 Outfits

The Meccano Motor Car Constructor outfit No.2 allowed owners to build more impressive clockwork motorcars than they could with the No.1 set.

The Number Two Outfits

  • The "Number Two" cars were larger and much grander-looking and more imposing than their No.1 counterparts, and cost about twice as much.
  • The chassis plates were two-piece, to allow a choice of two lengths, and the motor was detachable.
  • Unlike the No.1 outfits, the No.2 unfortunately didn't come with a roof option (probably due to the different chassis options) – all the models were open-top.
  • They could also be fitted with optional electric lighting, operated from the car dashboard.

However, the upscaling meant that the two sets of components were incompatible.

No 2 MOTOR CAR OUTFIT PARTS

  • A1000 – Radiator, Parallel sides
  • A1001 – Curved
  • A1004 – Clamping plate for Radiator, parallel sides
  • A1005 – Clamping plate for Radiator, curved sides
  • A1006 – Clamping plate nut
  • A1008 – Bonnet
  • A1010 – Windscreen
  • A1012 – Dash
  • A1014 – Body, Centre Section
  • A1015 – Body, Rear Section, rounded
  • A10l6 – Body, Rear Section, tapered
  • A1020 – Mudguard, Front    (×2)
  • A1020 – Mudguard, and Running Board, Front    (×2)
  • A1022 – Mudguard, Rear    (×2)
  • A1023 – Mudguard, and Running Board, Rear    (×2)
  • A1024 – Bracket, Rear Mudguard    (×2)
  • A1025 – Bracket, Lower Front Mudguard    (×2)
  • A1026 – Bracket, Upper Front Mudguard R.H.
  • A1027 – Tie Rod, Front
  • A1028 – Bracket, Upper Front Mudguard, L.H.
  • A1029 – Steering Wheel and Column
  • A1031 – Sleeve for Steering Column
  • A1032 – Bracket for Steering Column
  • A1034 – Track Rod
  • A1035 – Stud for Track Rod    (×2)
  • A1037 – Collar
  • A1038 – Stud for Bell Crank
  • A1039 – Bumper
  • A1040 – Bracket for Bumper with front number plate
  • A1041 – Brake Lever and Rod
  • A1043 – Expanding Brake Drum
  • A1044 – Distance Bush for Brake Lever
  • A1045 – Seat
  • A1046 – Instrument Board
  • A1050 – Clockwork Motor with Key
  • A1051 – Head Lamp
  • A1052 – Side Lamp    (×2)
  • A1055 – Wheel, Disc, Front
  • A1056 – Bolt for fixing Imitation Spare Wheel Cover
  • A1057 – Wheel, Disc, Rear
  • A1058 – Tyres
  • A1059 – Grub Screw for Disc Wheel, Rear    (×12)
  • A1060 – Imitation Spare Wheel Cover
  • A1061 – Number Plate, Rear
  • A1063 – Undershield, Rear
  • A1064 – Undershield, Front
  • A1065 – Frame Side Member
  • A1066 – Front Cross Member
  • A1069 – Screw for Stub Axle
  • A1070 – Rear Axle
  • A1071 – Pivot for Stub Axle
  • A1072 – Stub Axle R.H.
  • A1073 – Axle Bracket
  • A1074 – Driving Pinion
  • A1075 – Stub Axle L.H.
  • A1076 – Bolts, 5/32" 6BA    (×12)
  • A1077 – Nuts, Hexagon    (×12)
  • A1078 – Screwdriver
  • A1099 – Spanner
  • A1080 – Winding Key
  • A1082 – Bolts, ¼" 6BA    (×12)
  • A1083 – Drift
  • A1085 – Bolts, 6BA 5/16"    (×12)
  • A1086 – Bell Crank Nut and Block
  • A1087 – Nut for fixing driver    (×12)
  • A1088 – Bolt for fixing driver    (×12)
  • A1090 – Manual No 2
  • A1100 – Driver

Motor Car Lighting Set

This Lighting Set enables the headlamps of Motor Car models built with the No.2 Motor Car Outfit to be electrically lighted. Price 2/6

The Set contains everything necessary for electric lighting, with the exception of the dry battery. This should be of the 3-volt type, size 1 1/2 in. × 2 1/2 in. × 3/4 in., and can be obtained from any dealer in electrical supplies.

Pages in category ‘Meccano Motor Car Constructor No2 Outfits’

This category contains only the following page.

Media in category ‘Meccano Motor Car Constructor No2 Outfits’

The following 12 files are in this category, out of 12 total.