Category:Betta Bilda Engineer
Toy Brands and Manufacturers |
---|
Betta Bilda Engineer |
1968 - 1974 |
1968: Models built with BettaBilda Engineer [image info]
List of Parts [image info]
Betta Bilda Engineer was a strip-based construction set system, that looked slightly similar to Lego's wooden Bilofix system.
The big differences with "Engineer" were that the rounded holed strips were made of plastic rather than wood, and that the system came with adaptors that connected ot the side of a strip via its ridges, or to the edge of a strip via a 90-degree piece that plugged into one of the strip holes, to allow the standard Betta Builder bricks to connect to the strips, either parallel the the strip plane, or at 90 degrees.
Parts
- 1 – Nine Hole Beam
- 2 – Seven Hole Beam
- 3 – Five Hole Beam
- 4 – Three Hole Beam
- 5 – Two Hole Beam
- 6 – "U" Bracket
- 7 – "L" Bracket
- 8 – Road Adaptor
- 9 – Flat Adaptor
- 10 – Wheel Retainers
- 11 – Hand Crank Lever
- 12 – Winding Handle
- 13 – Spanner
- 14 – Crank Handle Knob
- 15 – Bolts (small and large)
- 16 – Nuts
- 17 – Base
- 18 – Angle Adpators (one left, one right)
- 19 – Hook and Winding Drum
- 20 – Wheel Tyre
- 21 – Twelve Stud Brick
- 22 – Eight Stud Brick
- 23 – Four Stud Brick
- 24 – Pulley Wheel
Set E1
"This set has enough beams, nuts, bolts and bricks to build simple models as shown"
Set E2
"Ths set includes more of everything, as well as a special base useful for building vehicles, etc."
See also:
Subcategories
This category has the following 2 subcategories, out of 2 total.
B
- Betta Bilda Big Trucks (1 F)
- Betta Bilda Engineer Accessories (2 P, 11 F)
Pages in category ‘Betta Bilda Engineer’
The following 2 pages are in this category, out of 2 total.
Media in category ‘Betta Bilda Engineer’
The following 26 files are in this category, out of 26 total.
- Adaptors, Betta Bilda Engineer Accessories Pack 5 (1969).jpg 1,600 × 1,437; 179 KB
- Aeroplane diagram, Betta Bilda Engineer (BettaBilda 1968).jpg 3,000 × 2,174; 549 KB
- Aeroplane, BettaBilda Engineer Set E1 (BettaBilda 1968).jpg 802 × 1,200; 215 KB
- Base, Betta Bilda Engineer Accessories Pack 7 (1969).jpg 1,600 × 1,437; 245 KB
- Betta Bilda - The Integrated Building System (BettaBilda 1968).jpg 3,000 × 1,067; 326 KB
- Betta Bilda Engineer Accessories, logo.jpg 1,589 × 1,760; 190 KB
- Betta Bilda Engineer Accessories.jpg 1,200 × 1,172; 287 KB
- Betta Bilda Engineer Set E1 (BettaBilda 1968).jpg 1,200 × 636; 165 KB
- Betta Bilda Engineer Set E2 (BettaBilda 1968).jpg 1,200 × 669; 169 KB
- Betta Bilda Engineer, logo.jpg 1,589 × 1,518; 152 KB
- Betta Bilda Engineer, pack 7 end artwork.jpg 2,000 × 663; 188 KB
- Bicycle, BettaBilda Engineer Set E1 (BettaBilda 1968).jpg 1,200 × 852; 240 KB
- Big Trucks, Betta Bilda (1969).jpg 1,600 × 1,216; 366 KB
- Biplane built with BettaBilda Engineer Set E1 (BettaBilda 1968).jpg 1,200 × 841; 206 KB
- Brackets, Betta Bilda Engineer Accessories Pack 6 (1969).jpg 1,600 × 1,437; 164 KB
- Brick adaptors, Betta Bilda Engineer (BettaBilda 1968).jpg 3,000 × 1,248; 377 KB
- Forklift Truck, BettaBilda Engineer Set E2 (BettaBilda 1968).jpg 768 × 1,200; 223 KB
- Large and Medium Beams, Betta Bilda Engineer Accessories Pack 3 (1969).jpg 920 × 1,600; 166 KB
- Models built with Betta Bilda Engineer (BettaBilda 1968).jpg 1,200 × 808; 264 KB
- Nuts and Bolts, Betta Bilda Engineer Accessories Pack 1 (1969).jpg 1,600 × 1,437; 171 KB
- Parts List, Betta Bilda Engineer (BettaBilda 1968).jpg 1,510 × 1,600; 272 KB
- Parts, Betta Bilda Engineer (BettaBilda 1968).jpg 3,000 × 2,342; 642 KB
- Small Beams, Betta Bilda Engineer Accessories Pack 2 (1969).jpg 1,600 × 1,437; 209 KB
- Truck, BettaBilda Engineer Set E2 (BettaBilda 1968).jpg 894 × 1,200; 222 KB
- Tyres and Wheels, Betta Bilda Engineer Accessories Pack 4 (1969).jpg 1,600 × 1,437; 159 KB
- Winch Set, Betta Bilda Engineer Accessories Pack 8 (1969).jpg 1,600 × 1,437; 164 KB