Category:Jetex rocket motors: Difference between revisions

From The Brighton Toy and Model Index
Jump to navigationJump to search
(Standard fuel/gauze/fuse configuration was assembled by the user, not at the factory. oops. Quite a lot more material to come.)
(+category)
 
(31 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{Toymaker|Date1=1948}}
{{#SEO: |title=Jetex rocket motors for models, Wilmot, Mansour & Co., Ltd. (1948-)}}
{{Box|Jetex_toys_and_model_kits_(GaT_1956).jpg|1956: Jetex and Wimco ready-to-run models|380}}
{{Toymaker|Date1=1948|Jetex_rocket_motor,_cross-section_diagram_(Hobbies_1967).jpg}}
The [[Jetex]] rocket motors were designed for model aircraft, but were sometimes also fitted to model cars and other toy and model vehicles.
{{Box|Jetex_toys_and_model_kits_(GaT_1956).jpg|1956: Jetex and Wimco ready-to-run models. The launch top right is not part of the Jetex range|380}}
{{Box|Jetex_Kits_and_Power_Kits_(Hobbies_1966).jpg|1966: Jetex Kits and Power Kits, Hobbies Annual|380}}
{{Box|Jetex_Type_50C_rocket_motor(Hobbies_1966).jpg|1966: Jetex Type 50C|380}}
{{Box|How_Jetex_Motors_Work_(Hobbies_1967).jpg|"How Jetex Motors Work"|380}}
{{Box|Jetex_Power_and_Accessories_(Hobbies_1967).jpg|1967: Jetex rocket engines and accessories|380}}
{{Box|Jetex_advert,_Hobbies_(MM_1967-07).jpg|1967: "Space age power by Jetex and [[Hobbies]]"|380}}
{{Box|Jetex,_article_by_Ernie_Webster,_KeilKraft_Gnat,_600px_(KeilKraft_1969).jpg|1969/1970: "JETEX" article by Ernie Webster, KeilKraft Handbook|380}}
'''[[Jetex]] reusable rocket motors''' (by '''Wilmot, Mansour & Co., Ltd.''', 1948-) were designed for model aircraft, but were sometimes also fitted to model cars and other model vehicles.
 
==Origins==
'''Joseph "Joe" Mansour''' and brothers '''John Wilmot''' and '''Charles Wilmot''' (known as "Bill") had been enthusiastic model aircraft builders, and had together started '''International Model Aircraft''', with backing from [[Lines Brothers]] to create the '''[[Tri-ang]] [[FROG]]''' ("'''F'''lies '''R'''ight '''O'''ff '''G'''round") model aircraft brand. During the war, IMA had produced drones for target practice for the military, and had upgraded the drones with small rocket boosters. With the ability of the Ministry of Defence to get scientists and engineers form different fields working together, ICI were tasked with producing a more convenient rocket fuel for the target drone boosters, and after John died in 1943 and Bill and Joe left IMA, the two remaining members of the original team decided to further refine and commercialise the rocket boosters for the model aircraft market.   
 
The new product was launched with the June 1948 issue of '''Aeromodeller''' magazine, showing a painting of a yellow/orange airborne jet-engined '''Gloster Meteor''' on the cover, which, on closer inspection, turns out to be a duplicate of a radio-controlled model pictured on the ground below, with owners. To the model aeroplane community, a cover image of a radio controlled aeroplane ''with no propellers'' must have been shocking and intriguing. 
 
Wilmot and Mansour initially only produced the engines (perhaps because they didn't initially have the time to also design and put into production actual planes, and perhaps because of not wanting to immediately go into head-on competition with their previous company, which was  backed by the giant Lines Brothers empire). As a result, initial Jetex-powered model aircraft were produced and sold independently by other companies, who were probably pleased to be able to concentrate on just making the aircraft  models and having Jetex supply the standardised ready-made power plants. Later, with the acquisition of a further ex-IMA designer or two, Jetex started producing their own range of model aircraft, cars and boats.


==Characteristics==
==Characteristics==
The popularity of the Jetex system in the 1950s was due to how well the system had been thought out. The propellant (guanidine nitrate) was comparatively slow-burn, with a comparatively cool exhaust and a decent burn time, which meant that a model aircraft didn't have to deal with severe stresses or have to have extravagant fireproofing, and the reusable shell could be made of aluminium or aluminium alloy with a lower melting point. The casing design included a sprung safety release valve so that the rocket wasn't prone to exploding if something went wrong, and the fuelling process involved placing a spiral coil of fuse against the pellet's flat face, held in place by metal gauze, producing a guaranteed consistent burn and removing another possible cause of unreliability. The metal gauze sheet was a fixed distance from the exhaust, which meant that there was a guaranteed length of fuse "tail" between the gauze and the lighting-point, and a minimum time delay between lighting the fuse and the fuel igniting – unless the use rammed a lit object ''inside'' the actual engine, it was pretty much impossible to accidentally light the fuel directly.
The popularity of the Jetex system in the 1950s was due to how well the system had been thought out. The propellant (guanidine nitrate) was comparatively slow-burn, with a comparatively cool exhaust and a decent burn time, which meant that a model aircraft didn't have to deal with severe stresses or have to have extravagant fireproofing, and the reusable shell could be made of aluminium or aluminium alloy with a lower melting point. The casing design included a sprung safety release valve so that the rocket wasn't prone to exploding if something went wrong, and the fuelling process involved placing a spiral coil of fuse against the pellet's flat face, held in place by metal gauze, producing a guaranteed consistent burn and removing another possible cause of unreliability. The metal gauze sheet was a fixed distance from the exhaust, which meant that there was a guaranteed length of fuse "tail" between the gauze and the lighting-point, and a minimum time delay between lighting the fuse and the fuel igniting – unless the user rammed a lit object ''inside'' the actual engine, it was pretty much impossible to accidentally light the fuel directly.


The manufacturers also made of point of mentioning that the guanidine nitrate propellant was supplied to them by '''ICI''' (who seem to have been a co-patenter), eliminating the worry of small-batch production producing variations in performance.  
The manufacturers also made of point of mentioning that the guanidine nitrate propellant was supplied to them by '''ICI''' (who seem to have been a co-patenter), eliminating the worry of small-batch production producing variations in performance.  


Overall, the Jetex system was easy to use, reliable, and comparatively safe, and its predictability meant that makers were confident about making model vehicles (even cars!) that could be sold as "Jetex-compatible" – knowing that the behaviour of the customer's unit would be pretty much the same the same as that of their test model.  
Overall, the Jetex system was easy to use, reliable, and comparatively safe, and its predictability meant that makers were confident about making model vehicles (even cars!) that could be sold as "Jetex-compatible" – knowing that the behaviour of the customer's unit would be pretty much the same the same as that of their test model.  
==Licensing==
Jetex motors were also made under licence in France by [[Solido]], and advertised in the French edition of [[Meccano Magazine]] during Summer 1955.
{{Quotation2|Les Avions à Réaction JETEX réalisant sans aucune complication des vols impeccables qui vous étonneront.
JETEX
Brevet mondial, combustible solide, innofensiv. 
JETEX Jouets & Moteurs à Réaction Fabriques en France sous licence par Solido
|Author=-|Publication=Meccano Magazine Francais|Date=May, June, July, August 1955}}


==1952 article excerpt:==
==1952 article excerpt:==
Line 17: Line 40:
{{Quotation2|<h4>How Jetex motors work</h4>
{{Quotation2|<h4>How Jetex motors work</h4>
Solid Fuel Charge (4) is ignited by the Plastic Igniter Wick (2), the coiled end of which is held against the face of the charge by a Gauze Disc (3) The gas is compressed in the main case (8) and forces its way out through the jet at supersonic speed, producing thrust. The end cap (5) is held by spring (9), and acts as a safety valve. If the jet were to clog, the gas escapes via the end cap. }}
Solid Fuel Charge (4) is ignited by the Plastic Igniter Wick (2), the coiled end of which is held against the face of the charge by a Gauze Disc (3) The gas is compressed in the main case (8) and forces its way out through the jet at supersonic speed, producing thrust. The end cap (5) is held by spring (9), and acts as a safety valve. If the jet were to clog, the gas escapes via the end cap. }}
==Rocket Motors==
{{Quotation2|{{Box|Atom_35_rocket_motor,_Jetex_(Hobbies_1966).jpg|Jetex Atom 35|280}}
====ATOM 35====
The smallest jet motor in the world, and the ideal power unit for small "chuck" gliders. Thrust {{frac|3|8}}-{{frac|1|2}} oz. Overall length {{frac|1|5|8}}. Max diameter {{frac|9|16}}  }}
{{Quotation2|{{Box|Jetex 50c rocket motor (MM 1967-07).jpg|Jetex 50C|280}}
====JETEX 50C====
The standard jet motor complete with fuel and igniter wick.
Duration 7 secs per pellet. Overall length of motor {{frac|1|7|8}}". Diameter {{frac|3|4}}". Weight unloaded {{Frac|5|16}} oz. Suitable for model aircraft with wing area not more than 40 square inches and an all-up weight of no more than 2 oz.  }}
{{Quotation2|{{Box|PAA-Loader,_Jetex_(MM_1967-07).jpg|Jetex PAA-LOADER|280}}
====PAA-LOADER====
Super augmented jet motor. Duration 7 secs per pellet but one, two or three pellets may be used to give a maximum duration of 18-20 seconds! Outfit complete with fuel and all accessories for only 17/3}}
{{Quotation2|{{Box|Scorpion_rocket_motor,_Jetex_(MM_1967-07).jpg|Jetex Scorpion|280}}
====SCORPION====
The ideal motor for contest models. Duration 7-9 seconds. Complete outfit with jet motor, augmenter tube, solid fuel, plastic igniter wick and all accessories for just 36/3}}
The use of an '''augmenter tube''' (basically a long tailpipe) was supposed to increase thrust, but for model aircraft designs also had the advantage that one could place the engine forwards  or centrally (for balanced weight), but have the exhaust jet emerging near the back of the plane, rather than have it potentially playing along the body of the aircraft and setting the tail on fire.


==Patent==
==Patent==
The Jetex concept seem to have been patented in 1950 (submitted in March 1948)  by an A. C. Hutchinson, M. Wilson, and ICI Ltd., patent number '''GB645897'''.
The Jetex concept seem to have been patented in 1950 (submitted in March 1948)  by an A. C. Hutchinson, M. Wilson, and ICI Ltd., patent number '''GB645897'''.
=="Rapier" rockets==
More recently, a range of rocket thrusters for model aircraft with broadly similar characteristics – the "Rapier" range – has started being produced in the Czech Republic. These are one-shot rockets with a cardboard casing.


==Addresses==
==Addresses==
Line 36: Line 83:
* [http://sam35.org.uk/wp-content/uploads/2018/02/35-THIS-JETEX.pdf Society of Antique Modellers: SAM35 index: Articles related to Jetex and equivalents (sam35.org.uk)]
* [http://sam35.org.uk/wp-content/uploads/2018/02/35-THIS-JETEX.pdf Society of Antique Modellers: SAM35 index: Articles related to Jetex and equivalents (sam35.org.uk)]
* [http://www.nadmes.org.uk/pages/features/jetex.aspx Fun with Jetex Engines (nadmes.org.uk)]
* [http://www.nadmes.org.uk/pages/features/jetex.aspx Fun with Jetex Engines (nadmes.org.uk)]
* [https://www.meccanoindex.co.uk/MMpage.php?I_page=zzmf550548&Mline=68673&id=1539340392 Jetex/Solido advert, Meccano Magazine Francais, May 1955 (meccanoindex.co.uk)]


=====patent:=====
=====patent:=====
Line 41: Line 89:


{{Wimco}}
{{Wimco}}
{{Mobo}}
{{Rocket}}

Latest revision as of 10:56, 15 October 2024

Toy Brands and Manufacturers

Jetex rocket motor, cross-section diagram (Hobbies 1967).jpg

Jetex rocket motors

1948 -     
1956: Jetex and Wimco ready-to-run models. The launch top right is not part of the Jetex range

1956: Jetex and Wimco ready-to-run models. The launch top right is not part of the Jetex range [image info]

1966: Jetex Kits and Power Kits, Hobbies Annual

1966: Jetex Kits and Power Kits, Hobbies Annual [image info]

1966: Jetex Type 50C

1966: Jetex Type 50C [image info]

"How Jetex Motors Work"

"How Jetex Motors Work" [image info]

1967: Jetex rocket engines and accessories

1967: Jetex rocket engines and accessories [image info]

1967: "Space age power by Jetex and Hobbies"

1967: "Space age power by Jetex and Hobbies" [image info]

1969/1970: "JETEX" article by Ernie Webster, KeilKraft Handbook

1969/1970: "JETEX" article by Ernie Webster, KeilKraft Handbook [image info]

Jetex reusable rocket motors (by Wilmot, Mansour & Co., Ltd., 1948-) were designed for model aircraft, but were sometimes also fitted to model cars and other model vehicles.

Origins

Joseph "Joe" Mansour and brothers John Wilmot and Charles Wilmot (known as "Bill") had been enthusiastic model aircraft builders, and had together started International Model Aircraft, with backing from Lines Brothers to create the Tri-ang FROG ("Flies Right Off Ground") model aircraft brand. During the war, IMA had produced drones for target practice for the military, and had upgraded the drones with small rocket boosters. With the ability of the Ministry of Defence to get scientists and engineers form different fields working together, ICI were tasked with producing a more convenient rocket fuel for the target drone boosters, and after John died in 1943 and Bill and Joe left IMA, the two remaining members of the original team decided to further refine and commercialise the rocket boosters for the model aircraft market.

The new product was launched with the June 1948 issue of Aeromodeller magazine, showing a painting of a yellow/orange airborne jet-engined Gloster Meteor on the cover, which, on closer inspection, turns out to be a duplicate of a radio-controlled model pictured on the ground below, with owners. To the model aeroplane community, a cover image of a radio controlled aeroplane with no propellers must have been shocking and intriguing.

Wilmot and Mansour initially only produced the engines (perhaps because they didn't initially have the time to also design and put into production actual planes, and perhaps because of not wanting to immediately go into head-on competition with their previous company, which was backed by the giant Lines Brothers empire). As a result, initial Jetex-powered model aircraft were produced and sold independently by other companies, who were probably pleased to be able to concentrate on just making the aircraft models and having Jetex supply the standardised ready-made power plants. Later, with the acquisition of a further ex-IMA designer or two, Jetex started producing their own range of model aircraft, cars and boats.

Characteristics

The popularity of the Jetex system in the 1950s was due to how well the system had been thought out. The propellant (guanidine nitrate) was comparatively slow-burn, with a comparatively cool exhaust and a decent burn time, which meant that a model aircraft didn't have to deal with severe stresses or have to have extravagant fireproofing, and the reusable shell could be made of aluminium or aluminium alloy with a lower melting point. The casing design included a sprung safety release valve so that the rocket wasn't prone to exploding if something went wrong, and the fuelling process involved placing a spiral coil of fuse against the pellet's flat face, held in place by metal gauze, producing a guaranteed consistent burn and removing another possible cause of unreliability. The metal gauze sheet was a fixed distance from the exhaust, which meant that there was a guaranteed length of fuse "tail" between the gauze and the lighting-point, and a minimum time delay between lighting the fuse and the fuel igniting – unless the user rammed a lit object inside the actual engine, it was pretty much impossible to accidentally light the fuel directly.

The manufacturers also made of point of mentioning that the guanidine nitrate propellant was supplied to them by ICI (who seem to have been a co-patenter), eliminating the worry of small-batch production producing variations in performance.

Overall, the Jetex system was easy to use, reliable, and comparatively safe, and its predictability meant that makers were confident about making model vehicles (even cars!) that could be sold as "Jetex-compatible" – knowing that the behaviour of the customer's unit would be pretty much the same the same as that of their test model.

Licensing

Jetex motors were also made under licence in France by Solido, and advertised in the French edition of Meccano Magazine during Summer 1955.

Les Avions à Réaction JETEX réalisant sans aucune complication des vols impeccables qui vous étonneront.

JETEX Brevet mondial, combustible solide, innofensiv.

JETEX Jouets & Moteurs à Réaction Fabriques en France sous licence par Solido

— , -, , Meccano Magazine Francais, , May, June, July, August 1955

1952 article excerpt:

The tiny aluminium motor burns pellets of solid fuel. So the fuel won't go up all at once like a firecracker, it is especially treated to burn quite slowly. The Jetex unit holds a single pellet of fuel, which takes about ten to twelve seconds to burn. Sounds like a short time, but this is a fast plane and will get high in the air with this length of power run. The Jetex motor comes packed with complete instructions for use, so we won;t go into it here. But READ the instructions before you try a power flight.

— , Howard G McEntre, , A Jet-Propelled Delta Plane, , Boy's Life, , September 1957

1967 promotional text:

How Jetex motors work

Solid Fuel Charge (4) is ignited by the Plastic Igniter Wick (2), the coiled end of which is held against the face of the charge by a Gauze Disc (3) The gas is compressed in the main case (8) and forces its way out through the jet at supersonic speed, producing thrust. The end cap (5) is held by spring (9), and acts as a safety valve. If the jet were to clog, the gas escapes via the end cap.

Rocket Motors

Jetex Atom 35

Jetex Atom 35 [image info]

ATOM 35

The smallest jet motor in the world, and the ideal power unit for small "chuck" gliders. Thrust 3⁄8-1⁄2 oz. Overall length 1 5⁄8. Max diameter 9⁄16

Jetex 50C

Jetex 50C [image info]

JETEX 50C

The standard jet motor complete with fuel and igniter wick.

Duration 7 secs per pellet. Overall length of motor 1 7⁄8". Diameter 3⁄4". Weight unloaded 5⁄16 oz. Suitable for model aircraft with wing area not more than 40 square inches and an all-up weight of no more than 2 oz.

Jetex PAA-LOADER

Jetex PAA-LOADER [image info]

PAA-LOADER

Super augmented jet motor. Duration 7 secs per pellet but one, two or three pellets may be used to give a maximum duration of 18-20 seconds! Outfit complete with fuel and all accessories for only 17/3

Jetex Scorpion

Jetex Scorpion [image info]

SCORPION

The ideal motor for contest models. Duration 7-9 seconds. Complete outfit with jet motor, augmenter tube, solid fuel, plastic igniter wick and all accessories for just 36/3

The use of an augmenter tube (basically a long tailpipe) was supposed to increase thrust, but for model aircraft designs also had the advantage that one could place the engine forwards or centrally (for balanced weight), but have the exhaust jet emerging near the back of the plane, rather than have it potentially playing along the body of the aircraft and setting the tail on fire.

Patent

The Jetex concept seem to have been patented in 1950 (submitted in March 1948) by an A. C. Hutchinson, M. Wilson, and ICI Ltd., patent number GB645897.

"Rapier" rockets

More recently, a range of rocket thrusters for model aircraft with broadly similar characteristics – the "Rapier" range – has started being produced in the Czech Republic. These are one-shot rockets with a cardboard casing.

Addresses

  • Wilmot, Mansour & Co., Ltd., Totton, Southampton, England

External links

patent:

Subcategories

This category has the following 3 subcategories, out of 3 total.

A

K

O

Pages in category ‘Jetex rocket motors’

This category contains only the following page.

J

Media in category ‘Jetex rocket motors’

The following 52 files are in this category, out of 52 total.

Retrieved from ‘https://www.brightontoymuseum.co.uk/w/index.php?title=Category:Jetex_rocket_motors&oldid=71944’