Category:Meccano Motor Car Constructor

From The Brighton Toy and Model Index
Revision as of 16:43, 23 February 2023 by BTMM Eric (talk | contribs) (+listing)
Jump to navigationJump to search
Toy Brands and Manufacturers

Meccano Motor Car Constructor, shop point-of-sale sign.jpg

Meccano Motor Car Constructor

1932 -     

The Meccano Motor Car Constructor sets started to appear in 1932, as a followup to the successful Meccano Aeroplane Constructor outfits the previous year.

Meccano Ltd understood that although Meccano was successful, it wasn't for everyone. Some people wanted to build model cars, but didn't didn't necessarily want the results to look like Meccano models. While Meccano tried to be logically faithful to the original objects, the results were always primarily Meccano models, and there was also an argument that although Meccano was perfect for building scaffolded structures such as cranes, and nuts and bolts items like mechanisms and machines, that perhaps it wasn't so faithful in an engineering sense for building model motorcars, where the originals invested much of their character in smooth streamlined body panels.

Like the "Aeroplane" sets, the Motor Car sets consisted mostly of custom parts (that allowed a range of car variations), and again, like the aeroplane sets, the smaller outfits weren't compatible with the larger ones. There wasn't always a huge variation between some of the smaller models, and sometimes the biggest visible difference was whether a spare wheel was attached to the rear of the side.

Outfit No.1 and Outfit No.2 were not compatible - No.2 produced larger cars (and cost around twice as much).

Prebuilt versions

The "MCC" models could also be ordered from the factory, pre-built. For the No.1 kit, the prebuilt variations on offer were:

  • 1/1 Sports Tourer with Hood
  • 1/2 Salon Coupe
  • 1/3 Road Racer
  • 1/4 Sports Tourer

The Meccano Two-seater Sports Car

In 1933, Meccano went a stage further, and produced a dedicated "non-constructor" model car, the Meccano Two-Seater Sports Car. This was similar in size but did away with the home-construction element, and was a conventional metal clockwork model with no assembly required. However, it was often advertised alongside the "constructor" outfits.

Motor Car Lighting Set

A wiring kit with tiny headlight bulbs that could be fitted inside an MCC car, and powered by a 3 Volt battery.

Motor Car Garage

" The Meccano Motor Car Garage provides accomodation for any Meccano model motor car or any other car of suitable size. It is strongly built, with imitation rough-cast finish, and adds the final touch of realism.
Inside dimensions: Height 5 in. Length 13 in. Width 7 3/4 in. Price 5/6

Example Models

No.1 Outfit models

No.2 Outfit models

Parts

No 1 MOTOR CAR OUTFIT PARTS

  • A1201 – Chassis Frame complete with mechanism
  • A1204 – Front Mudguard, Right
  • A1205 – Front Mudguard, Left
  • A1206 – Rear Mudguard, Right
  • A1207 – Rear Mudguard, Left
  • A1208 – Radiator
  • A1209 – Head Lamps Set
  • A1210 – Bonnet
  • A1211 – Dashboard and Windscreen Frame
  • A1212 – Windscreen
  • A1213 – Track Rod
  • A1214 – Steering Wheel and Column
  • A1215 – Seat
  • A1216 – Door, Right
  • A1217 – Door, Left
  • A1218 – Sports Body
  • A1219 – Saloon Body
  • A1220 – Saloon Roof with window
  • A1221 – Tonneau Cover
  • A1222 – Key
  • A1223 – Spring or Track Rod    (×12)
  • A1224 – Combined Spanner and Drift
  • A1225 – Folded Hood
  • A1226 – Manual No. 1
  • A1227 – Tyre and Wheel    (×4)
  • A1228 – Wheel Bush    (×4)
  • A1229 – Wheel Disc    (×4)
  • A1076 – Bolts, 6BA 5/32"    (×12)
  • A1077 – Nuts, Hexagon
  • A1079 – Spanner
  • A1084 – Split Pins    (×12)

No 2 MOTOR CAR OUTFIT PARTS

  • A1000 – Radiator, Parallel sides
  • A1001 – Curved
  • A1004 – Clamping plate for Radiator, parallel sides
  • A1005 – Clamping plate for Radiator, curved sides
  • A1006 – Clamping plate nut
  • A1008 – Bonnet
  • A1010 – Windscreen
  • A1012 – Dash
  • A1014 – Body, Centre Section
  • A1015 – Body, Rear Section, rounded
  • A10l6 – Body, Rear Section, tapered
  • A1020 – Mudguard, Front    (×2)
  • A1020 – Mudguard, and Running Board, Front    (×2)
  • A1022 – Mudguard, Rear    (×2)
  • A1023 – Mudguard, and Running Board, Rear    (×2)
  • A1024 – Bracket, Rear Mudguard    (×2)
  • A1025 – Bracket, Lower Front Mudguard    (×2)
  • A1026 – Bracket, Upper Front Mudguard R.H.
  • A1027 – Tie Rod, Front
  • A1028 – Bracket, Upper Front Mudguard, L.H.
  • A1029 – Steering Wheel and Column
  • A1031 – Sleeve for Steering Column
  • A1032 – Bracket for Steering Column
  • A1034 – Track Rod
  • A1035 – Stud for Track Rod    (×2)
  • A1037 – Collar
  • A1038 – Stud for Bell Crank
  • A1039 – Bumper
  • A1040 – Bracket for Bumper with front number plate
  • A1041 – Brake Lever and Rod
  • A1043 – Expanding Brake Drum
  • A1044 – Distance Bush for Brake Lever
  • A1045 – Seat
  • A1046 – Instrument Board
  • A1050 – Clockwork Motor with Key
  • A1051 – Head Lamp
  • A1052 – Side Lamp    (×2)
  • A1055 – Wheel, Disc, Front
  • A1056 – Bolt for fixing Imitation Spare Wheel Cover
  • A1057 – Wheel, Disc, Rear
  • A1058 – Tyres
  • A1059 – Grub Screw for Disc Wheel, Rear    (×12)
  • A1060 – Imitation Spare Wheel Cover
  • A1061 – Number Plate, Rear
  • A1063 – Undershield, Rear
  • A1064 – Undershield, Front
  • A1065 – Frame Side Member
  • A1066 – Front Cross Member
  • A1069 – Screw for Stub Axle
  • A1070 – Rear Axle
  • A1071 – Pivot for Stub Axle
  • A1072 – Stub Axle R.H.
  • A1073 – Axle Bracket
  • A1074 – Driving Pinion
  • A1075 – Stub Axle L.H.
  • A1076 – Bolts, 5/32" 6BA    (×12)
  • A1077 – Nuts, Hexagon    (×12)
  • A1078 – Screwdriver
  • A1099 – Spanner
  • A1080 – Winding Key
  • A1082 – Bolts, ¼" 6BA    (×12)
  • A1083 – Drift
  • A1085 – Bolts, 6BA 5/16"    (×12)
  • A1086 – Bell Crank Nut and Block
  • A1087 – Nut for fixing driver    (×12)
  • A1088 – Bolt for fixing driver    (×12)
  • A1090 – Manual No 2
  • A1100 – Driver

See also:

External links

Subcategories

This category has the following 3 subcategories, out of 3 total.

Media in category ‘Meccano Motor Car Constructor’

The following 42 files are in this category, out of 42 total.